OTA Remote Upgrade Technology for Smart Gas Meters
OTA (Over-the-Air) remote upgrade is a critical capability for large-scale maintenance of smart gas meters. The TJ-WL series smart gas meters connect to our intelligent platform via built-in wireless communication modules. After the upgrade package is uploaded to the platform, operation staff can issue upgrade commands in the energy management system, or manually trigger upgrades via serial AT commands on-site. The upgrade process does not overwrite the original stored data inside the meter. Even if the upgrade is abnormal, the metering and prepayment functions of the gas meter remain fully operational.
1. Upgrade Link
The device supports NB-IoT, 4G, GPRS and other wireless methods. During OTA upgrade, the intelligent platform uploads and manages firmware packages, and configures the OTA server address, port and upgrade tasks. The meter downloads the firmware package via wireless connection to complete firmware renewal.
2. OTA Trigger Modes
Upgrade via Energy Management System: Select target devices in the energy system and send OTA upgrade commands. The platform waits for the next active report from the meter after task release. Once the meter reports successfully, it enters command receiving state and starts automatic upgrade upon receiving the command.
Manual Upgrade via AT Commands: For on-site commissioning, send AT commands to the gas meter through an infrared tool to manually trigger OTA upgrade. First query or set the OTA SN with `AT+OTASN?`, configure the OTA server IP and port via AT+OTAREMOTE, then send AT+OTA to start the upgrade.

3. OTA Server Configuration
Two configuration methods are available for OTA server and SN code, for single on-site setup and bulk platform configuration respectively.
Setting via Serial AT Commands: Write OTA server address and SN code directly through infrared AT commands. Simple and fast, suitable for quick setup of a small number of gas meters.
Remote Configuration via Energy Platform: Configure the OTA server address, port and SN code on the energy platform and issue commands. The meter will receive and execute the configuration at its next report, ideal for bulk maintenance.
Flexible Server Selection: Users can adopt our OTA server for out-of-box access to cut deployment and O&M costs, or connect to self-built OTA servers to meet private deployment, independent data control and integration with existing energy platforms.

4. Data Retention & Failure Protection
Data Retention: Original stored data will not be modified during upgrade. Cumulative gas consumption, purchased gas volume, valve actions and parameter modification logs are stored in the chip and will not be lost after power failure. Storage zones for metering data, prepayment parameters and business records stay consistent before and after upgrade, and historical data is still available after upgrade.
Failure Protection: The upgrade channel is isolated from metering, valve control, data storage and other core functions. If upgrade fails, the meter keeps running with the original firmware; metering, valve and prepayment functions are unaffected. Firmware package verification, rollback and retry policies follow the platform and device version configuration.
https://www.zhongyismart.com Wuxi Zhongyi Smart Technology Co., Ltd. focuses on R&D and production of smart water meters, energy meters and gas meters. Our products are available in over 90 countries across the globe. Feel free to contact Zhongyi Intelligent for inquiries about smart water meters, electricity meters and gas meters.


